M&C TechGroup V..-H1 Series Operator's manual - Manual (Page 7)

7
Gas sampling and gas conditioning technology 6-6.1-ME
6 INTRODUCTION AND APPLICATION
In analysis technique, often temperatures must be kept above the sample gas dew point. Therefore, it
is absolutely necessary to avoid cold bridges.
In order to ensure this, the temperature regulated M&C hose-/tube connectors T..-H1 and V..-H1 are
used to connect heated sample lines type 3/4/5-N/M/H with an operating temperature up to 180 °C.
6.1 POWER SUPPLY
The electrically heated connectors T.-H1 and V.-H1 are available in 2 versions for alternating current
230V, 50Hz or 115V, 60Hz.