M&C TechGroup BA-P4 Operator's manual - Manual (Page 13)

13
Gas sampling and conditioning technology 10-1.1-ME
10 RECEIPT AND STORAGE
The BA... combustion air conditioning unit is a complete, pre-installed unit. The standard catalyst and
adsorber cartridge supplied is already fitted.

Immediately remove the combustion air conditioning unit and any special accessories carefully from
the packaging and check the contents against the delivery note.

Inspect the unit for possible transport damage and inform the transport insurer concerned
immediately if any damage is noticed.
N O T E !
The combustion air conditioning unit should be stored protected from frost!
11 INSTALLATION NOTES
The combustion air conditioning unit is a 19” plug-in unit.
N O T E !
The combustion air conditioning unit must only be used in the conditions
specified in the technical data.
The combustion air conditioning unit should be installed away from heat
sources and freely ventilated to prevent any accumulation of heat.
For outdoor installation, the combustion air conditioning unit must be
installed in a housing protected from frost in the winter and sufficiently
ventilated in summer. Exposure to direct sunlight must be avoided.