M&C TechGroup BA-P4 Operator's manual - Manual (Page 11)

11
Gas sampling and conditioning technology 10-1.1-ME
9 DESCRIPTION
Figure 2 shows the BA-P4 combustion air conditioning unit.
Burner air supply
BA
!
On
Luft/ Netz/
Outlet
Inlet
Adsorber
Katalysator
483 (84TE)
177
(4HE)
360
44
472
102 169
435
465
10
7
P2
FI3
P1
Ein
Aus
Druckregler
Hot
Ein/
Heiß
Catalyst
Regulator
YD1 FI4
On
Ein/
Air Power
S1 S2 B1
X1 X2 YA1 3 4 FI1 1 2
X1 = Power connection
X2 = Status contact output
1 = Combustion air out
2 = Exhaust air out
3 = Condensate out
4 = Air succing
B 1 = Temperature controller
FI1 = Air filter
FI3 = Catalyst
FI4 = Adsorber
P 1 = Manometer „Inlet‟
P 2 = Manometer „Outlet‟
S 1 = Switch „Air/On‟
S 2 = Switch „Power/On‟
YA1 = Condensate separator
YD1 = Pressure controller
Figure 2 BA-P4 combustion air conditioning unit
M&C BA and BA-P4 combustion air conditioning units are available as compact, operator and service-
friendly 19” plug-in units.
All controls and indicating elements are arranged easily accessible on the front panel of the
combustion air conditioning unit. These are:
- Inlet and outlet pressure gauges P1 and P2
- Control for outlet pressure YD1 (maximum 4bar)
- Connections for adsorber cartridge Fl4 and catalyst cartridge Fl3
-
“Air/On” switch S1, main switch S2 (operation is indicated by two green LEDs) and
- Temperature controller with digital temperature display B1