EVS IPDirector Version 6.2 - June 2013 DATABASE EXPLORER User Manual - Manual (Page 27)

Ordering Columns
To change the columns order, proceed in one of the following ways.
Select a column header and drag it to the left or right to the required place:
OR
1. Right-click a column header.
A menu is displayed.
2. Select Organize.
The Select Columns window opens and shows the list of columns in the current order.
3. Drag the selected column to the required position in the Visible Columns pane.
4. Click OK to confirm the changes.
Resetting the Column Organization to the Default One
To reset the column organization to the default one, proceed as follows:
1. Right-click the column headers area.
2. Select Reset Grid Organization.
2.5. Status Bar
The Status bar contains five areas shortly described in the table below:
Area Description
1. Element
Number
zone
The first zone of the Status bar shows how many elements are
included in the Elements grid of the Database Explorer.
2. Next Clip
zone
The second zone shows the next clip (in green) to be played if the
Auto-Play mode is active. The text is orange if the Auto-Play mode
is not active:
3. Auto-
Refresh
zone
The third zone displays the Auto-Refresh status. Its background is
green when it is ON, or red when it is OFF. See section "Tools
Menu" on page 6.
4. Associated
BEPlay
Remote
zone The fourth zone gives indication on the association status to a
BEPlay Remote.
is shown when no BEPlay Remote is connected to the IPDirector.
IPDirector - Version 6.2 - User Manual - Database Explorer
2. User Interface 15