EVS XTnano Version 11.02 - July 2013 Configuration Manual - Manual (Page 69)

3.2.3. General Information on Supermotion
Configurations
Concepts
The Supermotion cameras are two- to three-phase cameras, that record the incoming
feeds at a frame rate from 2 to 3 times higher than a standard camera.
Introduction
The feeds from supermotion cameras can directly be ingested into EVS servers. The
camera's number of phases directly determines the number of physical record channels
used on the EVS server.
A two-phase camera will use two physical record channels (primary or secondary link with
V3X, only primary link with COHX), a three-phase camera will use three physical record
channels, and so on.
Conditions
SLSM 2x-3x Configurations
The SLSM 2x-3x configurations are available with all HD and SD codecs natively
supported by the EVS server.
These configurations are valid when the following conditions are fulfilled:
• The license code 110 (Super Motion) is valid.
• The base configuration is Multicam LSM.
CONFIGURATION MANUAL XTnano Server 11.02
3. Multicam Configuration 61