Protocol-specific assignment rules, Standalone protocol, Protocol used in exclusive mode – EVS XTnano Version 11.02 - July 2013 Configuration Manual User Manual
Page 106

•
In a Server base configuration:
◦
A Remote Panel is not allowed.
◦
Controllers other than the EVS Remote can be assigned to play or record
channels, taking into account the protocol-specific rules on controller use and
combinations.
Protocol-Specific Assignment Rules
Standalone Protocol
The table shows whether or not the given protocol, used as a standalone (as main
controller, without secondary controller) can be assigned to the specified number of play
channels, record channels or play and record channel combinations.
The green cells refer to allowed assignments, the red ones to banned assignments.
Numbers in the cells refer to the notes mentioned below the table.
Remote
VDCP
Sony
Odetics
DD35
Odetics
F&K
VDCP
F&K
1 PGM
2 PGM
2
> 2 PGM
1 REC
1
> 1 REC
1 PGM
+ 1 REC
Several PGM
+ 1 REC
Several PGM
+ Several REC
1. Every recorder
2. Only consecutive PGMs
Protocol Used in Exclusive Mode
The table shows whether or not the given protocol, used in exclusive mode (as a main
controller or secondary controller) can be assigned to the specified number of play
channels, record channels or play and record channel combinations.
The green cells refer to allowed assignments, the red ones to banned assignments.
Numbers in the cells refer to the notes mentioned below the table.
Remote
VDCP
Sony
Odetics
DD35
Odetics
F&K
VDCP
F&K
Main Controller
1 PGM
98
3. Multicam Configuration
EVS Broadcast Equipment S.A.
Issue 11.02.A July 2013