EVS XTnano Version 11.02 - July 2013 Configuration Manual - Manual (Page 43)

Next to the line corresponding to the activated codes, the license type and the expiration
date (if any) are displayed.
In the Web-Based Interface
To enter a new license code delivered via a key number, proceed as follows:
1. From the Multicam Setup window, click Options code management in the Tools
menu to open the Options code management window.
2. Type the code number in the first field of the Add new code group box:
3. Click Submit.
The lines corresponding to the new codes are added to the code list.
How to Remove a License Code
You can remove a license code from the server-based application. Proceed as follows:
1. Press the UP ARROW and DOWN ARROW keys to move inside the options list and
select the option to be removed.
2. When the option is selected (highlighted in white), press simultaneously CTRL+
DELETE on the keyboard.
3. Confirm the deletion of the option with ENTER.
2.5. Server Maintenance
2.5.1. Chapter Contents
The table below presents the topics of this section and shows whether the described
features are available from the web-based interface and/or from the server-based
interface.
Commands Page Server-Based Web-Based
"Rebooting the EVS Server" 2.5.2 Yes No
"Hardware Check" 2.5.3 Yes No
"Clearing Video Disks" 2.5.4 Yes No
"Exporting Log Files" 2.5.5 Yes No
CONFIGURATION MANUAL XTnano Server 11.02
2. Multicam Setup 35