EVS XTnano Version 11.02 - July 2013 Configuration Manual - Manual (Page 102)

3G/Dual
Description Defines the interface the EVS server will use with the 3D
standards:
• The Dual Link interface consists of a pair of HD-SDI serial
links and provides a bitrate of 2.970 Gbit/s.
• The 3G-SDI is not supported on an XTnano server.
Values The possible values are:
• ‘No’: available in all cases.
• ‘Dual’ (Dual-Link) available with:
◦
License code 23 (3D Dual-Link) active
AND
◦ 3D setting set to 'Yes'
Default value No
Port Settings
User Interface
The port settings allow assigning the RS422 ports to the various external controllers (EVS
or third-party) that will communicate with the EVS server.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode
on page 1 on the server- and web-based interfaces
• in the Technical menu of the Remote Control Panel (T2.X)
The following screenshot highlights the Port settings, defined on page 1 of the Channels
tab in the server-based application:
94 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013