EVS XTnano Version 11.02 - July 2013 Configuration Manual - Manual (Page 104)

Name
Description User-defined name for play or record channel. This name will
be used for the OSD, and in the IPDirector application suite.
The name can contain maximum 24 characters.
Main ctrl (Main Controller)
Description Name of the main device/controller allowed to control the given
play or record channel.
Values For a controller to be available in the list of values, it must first
be assigned to an RS422 port in the port settings.
In addition, rules specific to each controller apply to the
assignment of the controller (used alone or in combinations
with other controllers) to play or/and record channels. See
section "Rules for Controller Assignment" on page 97 for more
information.
An error message will be displayed to warn you in case of a
wrong protocol selection or protocol combination, and the fields
that contain errors will be highlighted in red.
Sec. ctrl (Secondary Controller)
Description Name of the main device/controller allowed to control the given
play or record channel.
Values For a controller to be available in the list of values, it must first
be assigned to an RS422 port in the port settings.
In addition, rules specific to each controller apply to the
assignment of the controller (used alone or in combinations
with other controllers) to play or/and record channels. See
section "Rules for Controller Assignment" on page 97 for more
information.
An error message will be displayed to warn you in case of a
wrong protocol selection or protocol combination, and the fields
that contain errors will be highlighted in red.
96 3. Multicam Configuration
EVS Broadcast Equipment S.A. Issue 11.02.A July 2013