EVS IPClipLogger Version 6.15 - April 2013 User Manual - Manual (Page 89)

9.5.4. Managing Existing Logs
The following operations can be performed on logs from the Player Session tab.
If you want to… then, …
View an existing
log 1. Load the corresponding clip
2. Select the log in the Logs grid.
View a log from
linked clips 1. Load a linked clip.
2. Double-click a log line in the Logs grid to load the log of the clip
from the preview recorder
or
Click a log line in the Logs grid to load the log of the loaded clip
(created from the preview recorder or a ganged recorder)
Delete a log 1. Select the log in the Logs grid
2. Press Delete.
Edit a log 1. Load the corresponding clip
2. Click the log in the Logs grid so its metadata are displayed in
the Logging pane
3. Edit the log: metadata or TC by moving through the clip
4. Click Save Log.
The log is updated.
Add another log
to a logged clip 1. Load the corresponding clip
2. Browse the clip
3. Create the log
4. Save the log
The log is added in the Associated Logs pane.
In case the clip has linked clips, the deletion, addition or edit of logs are performed on all
the clips linked the loaded one.
IPClipLogger - Version 6.15 - User Manual
9. Adding Logs to Media 81