EVS IPClipLogger Version 6.15 - April 2013 User Manual - Manual (Page 63)

provides the timecode displayed in the Live Session tab. It will also be the angle selected
to view an event when an IPDirector operator will preview a log.
The IPClipLogger prevents two loggers or two Live sessions from using the same preview
recorder.
In addition to the main recorder channel, one or several other recorder channels, recording
the scene from different camera angles at the same time, may also be selected. Then,
clips and logs will be created for all of them at once.
Selecting the Main Recorder
Purpose
The selection of the main recorder channel is mandatory. It is used as preview recorder
and provides the timecode displayed in the Live Session tab and used as reference.
Constraints and Limitations
• The preview recorder must be assigned to a recorder channel that is managed with a
direct RS422 link to the EVS video server the channel is on. If not, the system will not
function correctly, and no live timecode will be displayed.
• The following recorder channels are not available from the list :
◦ A recorder that is selected in another Live Session tab as preview recorder. Such
a recorder channel is locked and is no longer available in other Live Session tabs
as a preview recorder until the session or the application is closed or the recorder
channel selection is cleared.
◦ Recorders that are ganged to the one selected in another Live Session tab as
preview recorder.
How to Select the Main Recorder
In Live mode, to select the recorder channel which will be used as preview recorder,
proceed as follows:
1. Right-click the Preview Recorder Channel field.
A contextual menu displays the list of recorder channels available as preview
recorders.:
IPClipLogger - Version 6.15 - User Manual
5. Loading Media 55