EVS Xfile Version 2.19 - November 2012 User Manual - Manual (Page 194)

Issue 2.19.A XFile Version 2.19 – User Manual
EVS Broadcast Equipment – November 2012
184
How to Create a New Ghost Image of your
System
1. Reboot the system on Bootable DVD (or USB key) which is delivered with the
original system. On XFILE system, modify Boot priority in the BIOS settings in
order to boot on the USB key.
2. For USB key only, select ‘EVS Ghost Backup or Restore’ in the menu.
3. In the ghost startup window, press ENTER.
4. In the next window, select Local / Partition / To Image then ENTER.
5. In the next window, select the Source drive, drive #1 then ENTER.
6. In the next window, select the Source partition #1 then ENTER. Press the TAB
key to select the OK button, then ENTER.
7. In the next window, press the TAB key to select the Look in area and open it by
pressing the down arrow key. Select the destination drive: D fat drive
(RESTORE) then ENTER.
8. Press the TAB key to select the File name area then type the file name:
XFI111XX (where 111XX is the current version number). It is also recommended
to provide a description of the GHOST you are creating.
9. Press the TAB key to select Save then ENTER.
10. Select ‘Compress high’, then ENTER.
11. At the message ‘Proceed with partition image creation’ select yes then ENTER.
12. When the process is complete press ENTER. Select Quit then ENTER, then Yes
and ENTER.
13. Remove the USB key or DVD and reboot the system.