EVS Xfile Version 2.19 - November 2012 User Manual - Manual (Page 118)

Issue 2.19.A XFile Version 2.19 – User Manual
EVS Broadcast Equipment – November 2012
108
XNet Area
This area displays the number of clips already saved to XFile for each system connected
to the XNet and/or to the Gigabit network.
The first line displays the following information.
User Interface
Element Meaning
Server identification : UserNumber and UserName.
Server serial Number.
Current configuration of the channels.
The second line displays the following information.
User Interface
Element Meaning
Gives information on the hybrid mode configured:
A green label indicates that transfers can be performed
through an SDTI connection, i.e. an EVS video server and an
XFile are connected to the XNet and SDTI transfers are
allowed through the XFile Config System window. Refer to
section 3.1.2 ‘Transfer Mode’ on page 8
A red label indicates that the GBE Only mode is used or that
the EVS video server is disconnected.
IP addresses for the two HCTX ports of a server.
A green label indicates that the IP address can be pinged and
that it is reachable in jumbo frame (Full availability)
A light orange label indicates that the IP address can be
pinged but that it is not reachable in jumbo frame (Partial
availability).
A pink label indicates that the IP address is within a range of
compatible addresses but that it is not available and cannot be
pinged.
A red label indicates that the IP address is not within a range
of compatible addresses.
Number of connections currently opened and used.
In GBE mode, six jobs can be processed simultaneously.