EVS Xfile Version 2.16 - November 2011 User Manual - Manual (Page 84)

Issue 2.16.A XFile Version 2.16 – User Manual
EVS Broadcast Equipment – November 2011
74
3.7.3 H
OW TO
P
ERFORM A
M
ULTI
-S
ELECTION FOR
R
ESTORE
To select multiple clips from an XFile to restore them to an EVS video server,
proceed as follows:
1. In the XFile list on the main XFile window, do one of the following:
• To select a list of contiguous clips, press SHIFT and select the first and
last clips of the list.
• To select non-contiguous clips, press CTRL and select the clips.
• To select all the clips displayed in the XFile list, press CTRL + A. The
Select All command is also available via the contextual menu on the list
of clips.
2. Select the server from the XNet list.
3. Change the display of the list to find one location.
4. In the XNet list, select the first location to restore the clips.
5.
Click or to open the following window:
• If the selected location is free, the clip destination lights green.
• If the selected location is already filled, the clip destination lights red. In
this case, the clip restore will be aborted. A second operation is
necessary to restore the clip to another location on the XNet.
6. Select a restore method from the Destination Mode drop-down list. For
more details, refer to the section ‘Restore Destination Mode’, on page 75.
7. Click OK.