EVS Xfile Version 2.16 - November 2011 User Manual - Manual (Page 189)

XFile Version 2.16 – User Manual
EVS Broadcast Equipment – November 2011
Issue 2.16.A
179
CREATING AND REINSTALLING A GHOST
OF YOUR SYSTEM
The aim of this procedure is to describe how to create a ghost image of your
system and how to restore your system with an existing image.
Note
All delivering systems have a R: RESTORE partition located on the
system disk. This allows you to have an image file of the C: partition,
and easily restore the complete XP operating system and XFile Software
to the factory default state at any time.
H
OW TO
R
E
-
INSTALL YOUR
S
YSTEM WITH AN
E
XISTING
I
MAGE
1. Reboot the system on Bootable DVD (or USB key) which is delivered with
the original system. On XFILE system, modify Boot priority in the BIOS
settings in order to boot on the USB key.
2. For USB key only, select EVS Ghost Backup or Restore in the menu.
3. In the ghost startup window, press ENTER to open the toolbar.
4. In the next window, select Local / Partition / From Image followed by
ENTER.
5. In the next window, press the TAB key to select the ‘Look in area’ and
open the list by pressing the [down arrow] key. Select the source drive: D
fat drive (RESTORE) then ENTER.
6. Select the image file you want to restore then ENTER.
7. In the next window, select the Source partition #1 then ENTER.
8. In the next window, select the Destination drive #1 then ENTER. Press the
TAB key to select the OK button, and then press ENTER.
9. In the next window, select the Destination partition #1 then ENTER. Press
the TAB key to select the OK button, then press ENTER.
10. At the message ‘Proceed with partition restore’ select yes then ENTER.
11. When the process is complete press ENTER. Select Quit then ENTER, then
Yes and ENTER.
12. Remove the DVD disk (or USB key) and reboot the system.