3 transfer rate, 4 time, Transfer rate – EVS Xfile Version 2.16 - November 2011 User Manual User Manual
Page 125: Time, Ransfer

XFile Version 2.16 – User Manual
EVS Broadcast Equipment – November 2011
Issue 2.16.A
115
4.2.3 T
RANSFER
R
ATE
The counter displays the current transfer rate. An average of bit-rate for all
operations is done in real-time.
4.2.4 T
IME
The current time is displayed on the top right of the screen. As you can select
which time information you will work with in the time grid, the time display
depends on this selection. You can select the time display to be used in the time
grid in the Record Grid > Display Mode menu.
T/C Primary: the time displayed is either the LTC or user-defined timecode type
that is displayed at the bottom the VGA and is used to work with the video
material stored on a given recorder.
LTC:
User T/C: the time displayed is the user time code of the first camera available on
the first EVS video server displayed in the grid. This time code is defined by the
user on the EVS video server.
PC time: the current time on the XStream workstation will be displayed (not the
XNet time).
XT Time Code: the time displayed is the LTC time on the first available camera
of the first EVS video server displayed in the grid. The EVS video server name
and camera name are specified with the time information.