EVS Xfile Version 2.16 - November 2011 User Manual - Manual (Page 42)

Issue 2.16.A XFile Version 2.16 – User Manual
EVS Broadcast Equipment – November 2011
32
To switch one color for another, proceed as follows:
Left-click
Right-click
Right-click Right-click
Left-click
Files Move
If the job succeeds, the files will be moved to the ‘Done_Successful’ subfolder.
If the job failed after 5 tries, the files will be moved to the ‘Done_Failed’
subfolder.
A
UTO
P
UBLISH
The AutoPublish function enables the automatic publication of files from a folder
to a defined location on the XNet. This is done through the SDTI network.
The AutoPublish Mode can be activated from the main XFile window by clicking
the AutoPublish button.
Enable AutoPublish at Start
If the Enable AutoPublish at Start box is selected, the AutoPublish Mode will be
active as soon as XFile is started.
Enabling Configuration
Up to 2 different configurations can be pre-defined. To do so, select a
configuration number in the Config field, fill in all the other fields and click OK.
To enable one of these configurations, select it the Config field, select the Enable
Config box and click OK. Some or all of the predefined configurations can be
enabled.
Scan Folder
This field defines the folder to scan for backup files to be published.
AutoImport
This parameter allows the extraction of metadata information and the creation of
XML files when working with files not associated to XML files, such as .mxf and
.mov.
Refer to section ‘AutoImport’ on page 31 for a detailed description.