EVS Xfile Version 2.16 - November 2011 User Manual - Manual (Page 133)

XFile Version 2.16 – User Manual
EVS Broadcast Equipment – November 2011
Issue 2.16.A
123
N
UMBER OF
D
ISKS
Specifies the number of disks assigned to the channels to backup.
Note
In order to ensure good performances in data transfers we highly
recommend balancing the load onto several disks.
P
ATH
C
HANNELS
Those fields specify the paths where the files will be saved for each channel.
4.6.2 J
OBS
T
AB
The settings specified in the Jobs tab are applicable to the Scheduler and
QuickStart modes, except the Default Job Duration option which is only relevant in
the Scheduler mode.
These are the default settings for the QuickStart mode. Before launching a
QuickStart job, you can define other settings in the Output tab of the QuickStart
Setup window. Refer to section 4.10.3 ‘Setup in QuickStart Mode’ on page 149.
They will have priority on these default settings, provided that the option Keep
Outputs’ Configuration while Creating a Job has been selected in the Jobs tab.