Garmin GPSMAP 295 User Manual
Page 59

49
WPT
To select an existing user-created waypoint as a GOTO destination:
1. Display the user waypoint information by following the steps on page 47.
2. Use the ROCKER KEYPAD to highlight the ‘IDENTIFIER’ field and press ENTER.
3. Use the ROCKER KEYPAD to highlight the name of the destination waypoint—UP/DOWN to
select the highlighted character and RIGHT to move to the next character field—and press ENTER
once all characters for the waypoint name have been entered. Press ENTER again to return to the
user waypoint information page
4. Use the ROCKER KEYPAD to highlight the on-screen ‘GOTO’ button and press ENTER.
With the user waypoint information displayed, press MENU to display an options window with the
following options:
• Add to Favorites
• Delete By Symbol
• Delete All
Add to Favorites— adds the displayed waypoint to a list of favorites (see page 56).
Delete By Symbol— allows you to select a user waypoint and all waypoints with the same
corresponding symbol will be deleted from memory
Delete All — deletes all user waypoints currently stored in memory.
To delete all user waypoints or all waypoints with a common symbol:
1. Display the user waypoint information by following the steps on page 47.
2. To delete all waypoints with a common symbol: Use the ROCKER KEYPAD to highlight the
‘IDENTIFIER’ field and press ENTER. Use the ROCKER KEYPAD to enter the name of the desired
waypoint—UP/DOWN to select the highlighted character and RIGHT to move to the next character
field—and press ENTER once all characters for the waypoint name have been entered. Press
ENTER again to return to the user waypoint information page
3. Press MENU to display an options window.
4. Use the ROCKER KEYPAD to highlight ‘Delete All’ or ‘Delete By Symbol’ (as appropriate) and press
ENTER.
User Waypoints
To delete all waypoints with the same map symbol, select a
waypoint with the symbol you wish to delete, press MENU,
then select ‘Delete By Symbol’.
To delete all user waypoints, press MENU and select the
‘Delete All’ option.