Garmin GPSMAP 295 User Manual
Page 50
40
WPT
Select the ‘AVIATION’ tab to view database information for
airports, VORs, NDBs and intersections. Airports, VORs and
NDBs may be selected by identifier, facility name or city.
Intersections may only be selected by identifier.
If an airport is selected on the ‘AVIATION’ information
page, use the ROCKER KEYPAD to select the ‘RUNWAY’,
‘COMM’ or ‘APPROACH’ tabs and view additional
database information for the selected airport.
Jeppesen Database Information
Waypoint information pages are displayed by pressing the D WPT key and are organized by a
series of ‘file tabs’ across the top of the page. The first four tabs are used exclusively for Jeppesen data.
To view the Jeppesen database information for a waypoint:
1. Press D WPT to display the waypoint information pages.
2. Use the ROCKER KEYPAD to select the ‘AVIATION’ file tab at the top of the page.
3. Press the DOWN portion of the ROCKER KEYPAD to select the identifier, facility name or city field
(in that order; identifier only for intersections) and press ENTER.
4. Use the ROCKER KEYPAD to enter the identifier, facility name or city—UP/DOWN to select the
highlighted character and RIGHT to move to the next character field. As you scroll through the
characters the GPSMAP 295 will display any database entries with the same characters you have
entered to that point. (If more than one entry exists in the database for the characters you have
entered, a duplicate waypoint window will appear listing the country/region for each entry.)
5. Press ENTER once the desired waypoint is displayed.
6. If an airport is selected, use the ROCKER KEYPAD to select the ‘RUNWAY’, ‘COMM’ or ‘AP-
PROACH’ file tabs at the top of the page and display additional database information.
You can select an airport directly from the ‘RUNWAY’, ‘COMM’, or ‘APPROACH’ informa-
tion pages by entering the airport identifier at the top of the page. See step 4 above.
Information Windows:
includes waypoint
identifier (name) and
position
File Tabs
Area Map
On-screen
GOTO and
OK buttons
.