Garmin NavTalk Pilot - Manual (Page 130)

116
Section 6
GPS Receiver
Reference
To change the Active Route Page data, press
the LEFT/RIGHT keys on the ARROW keypad.
Many features of the unit are menu driven. Each of the
main pages has an options menu, allowing you to custom
tailor the corresponding page to your preferences and/or
select special features that specifically relate to that page.
To display the Active Route Page Options, press
MENU with the Active Route Page displayed.
The following options are available:
Show Map— allows you to view the area surround-
ing the selected waypoint’s position. While viewing the
map display, you can also use the IN/OUT zoom keys to
see additional details.
Setup Plan— displays a trip planning screen,
allowing you to plan and review distance, fuel and time
en route information for the selected route.
To use the trip planning features:
1. Highlight ‘Setup Plan’ and press ENTER. The trip
planning screen is displayed, showing information
for the entire route.
2. To review information for a single route leg,
highlight the ‘plan’ field, press ENTER and select
the desired route leg using the ARROW keypad.
Press ENTER to confirm.
3. To enter a speed for your trip, highlight the speed
field, press ENTER and use the ARROW keypad to
select the desired speed. Press ENTER to confirm.
4. Enter an hourly fuel flow (if desired) in the fuel field,
using the same steps as above.
5. Enter the date and time of departure (the current
date/time will be offered automatically), using the
same steps as above.
Re-evaluate— reactivates the current route and
selects the route leg closest to your current position as the
active leg. The active leg defines the current ‘from’ and
‘to’ waypoints.
‘Re-evaluate’ will
reactivate the current
route and select the closest
leg. This feature is handy
if you deviate around
weather and later wish to
return to the route.
‘Setup Plan’ allows you
to define planned speed,
fuel flow and departure
time in order to review
trip planning figures.