Garmin NavTalk Pilot - Manual (Page 106)

92
Section 6
GPS Receiver
Reference
The Main Menu’s
‘Waypoints’ option
allows you to view
database information
for airports, runways,
comm frequencies,
VORs, NDBs, etc.
Select the desired
waypoint category by
selecting the
corresponding ‘file tab’
at the top of the page.
Airport Identifier, City/State, Name, Position,
Elevation, Fuel
Runway Length, Width, Orientation, Surface,
Lighting, Diagram
Comm Frequencies for: ATIS, Pre-Taxi,
Clearance, Ground, Tower, Unicom,
Multicom, Approach, Departure,
Arrival, Class B, Class C, TMA, CTA,
TRSA
VOR Identifier, City/State, Facility Name,
Position, Freq., Indication of
Co-Located DME or TACAN
NDB Identifier, City/State, Facility Name,
Position, Freq.
Int Intersection Name, Region/Country,
Nearest VOR
User Wpt Name, Position, User Comments,
Reference Waypoint
User List Name, Symbol, Total Number of User
Waypoints Created
Waypoint Information Pages
Your NavTalk Pilot uses a built-in Jeppesen database
to provide position and facility information for thousands
of airports, VORs, NDBs and intersections. Each facility
in the database is stored as a waypoint, with its own
latitude/longitude, identifier (up to six letters and/or
numbers) and other pertinent information. Waypoint
information is available from the ‘Waypoints’ selection
under the Main Menu. Waypoint information is divided
into categories (each represented by a ‘file tab’), with
different types of information available for each. The
following table lists the file tabs and information available
under each tab: