Multi-information display – Acura 2011 RL User Manual
Page 81
When you turn off the engine, INST.
MPG or INST. L/100 km is also
reset.
This shows your instant fuel
economy.
Along with the trip meter, the trip
computer calculates these values:
Instantaneous Fuel Economy
Range
Elapsed Time
Average Fuel Economy
Average Vehicle Speed
This shows the estimated distance
you can travel on the fuel remaining
in the fuel tank. This distance is
estimated from the fuel economy
you received over the last several
miles (U.S.) or kilometers (Canada),
so it will vary with changes in speed,
traffic, etc.
When the battery is disconnected, or
you refuel, RANGE is also reset.
This shows the accumulated
traveling time since you last reset it.
When you turn the ignition switch to
the ON (II) position, ELAPSED
TIME is reset.
You can customize the ELAPSED
TIME reset conditions on the multi-
information display (see page
).
This shows the average speed you
are traveling in miles per hour (mph)
for U.S. models or kilometers per
hour (km/h) for Canadian models.
When you reset Trip A, average
speed is also reset.
You can customize the average
speed reset condition on the multi-
information display (see page
).
This shows your vehicle’s average
fuel economy in mpg (U.S. models)
or liter/100 km (Canadian models)
since you last reset Trip A or Trip B.
The average fuel economy will be
reset when you reset the trip meter,
or if the vehicle’s battery goes dead
or is disconnected.
You can customize the average fuel
A reset condition on the multi-
information display (see page
).
101
99
99
Multi-Information Display
INST. MPG (U.S. models)/INST.
L/100km (Canadian models)
Trip Computer
RANGE
ELAPSED TIME
AVERAGE SPEED
AVERAGE FUEL A/B
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
75
10/08/04 18:54:45 31SJA660_080