Acura 2011 RL - Manual (Page 306)

After 30 minutes with this screen
displayed, turn off the engine and
restart the vehicle. If you now see
the
, the GPS
initialization is complete.
The average acquiring time is less
than 10 minutes, but it can take as
long as 45 minutes.
If the system is still unable to
acquire a signal, follow the
instructions on the screen, or
contact your local dealer for
assistance.
If within ten minutes the system fails
to locate a sufficient number of
satellites to locate your position, the
screen above appears. Follow the
instructions on the screen.
If this procedure is not necessary the
system proceeds directly to the
(see page ).
During initialization, the system
searches for all available GPS
satellites, and obtains their orbital
information. During this procedure
the vehicle should be out in the open
with a clear view of the sky.
286
Compass System (U.S. model without navigation system)
Disclaimer screen
Compass screen
300
NOTE:
10/08/04 19:33:43 31SJA660_305