Acura 2011 RL - Manual (Page 164)

You can raise the rear head
restraints by hand.
To lower the rear head restraints for
better visibility, press the rear head
restraint tilt button on the ceiling
console with the ignition switch in
the ON (II) position.
When reinstalling a head restraint,
put the legs back in place. Then
adjust it to the appropriate height
while pressing the release button.
Make sure the head restraint locks
in position when you reinstall it.
To remove the front head restraint
for cleaning or repair, pull it up as far
as it will go. Push the release button
and pull the restraint out of the seat-
back.
Seats
Removing the Head Restraint
158
REAR HEAD RESTRAINT
TILT BUTTON
REAR
Failure to reinstall the head
restraints can result in severe
injury during a crash.
Always replace the head
restraints before driving.
10/08/04 19:08:00 31SJA660_163