Acura 2011 RL - Manual (Page 481)

Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Reinstall the socket into the light
assembly. Turn it clockwise to
lock it in place.
Each outside mirror has side turn
signal lights. The lights should be
replaced by your dealer.
Test the lights to make sure the
new bulb is working.
Reinstall the back-up light cover.
The license plate has two lights
above it. The bulbs should be
replaced by your dealer.
This light should be replaced by your
dealer.
3.
4.
5.
6.
7.
Lights
Side Turn Signal Lights
Rear License Plate Light Bulbs
High-mount Brake Light
Ma
int
e
na
nce
475
BULB
SOCKET
10/08/04 20:05:21 31SJA660_480