Acura 2011 RL - Manual (Page 167)

Keep the inside and outside mirrors
clean and adjusted for best visibility.
Be sure to adjust the mirrors before
you start driving.
The inside mirror can automatically
darken to reduce glare. To turn on
this feature, press the button on the
bottom of the mirror. The AUTO
indicator comes on as a reminder.
When it is on, the mirror darkens
when it senses the headlights of a
vehicle behind you, then returns to
normal visibility when the lights are
gone. Press the button again to turn
off this feature.
Push the appropriate edge of the
adjustment switch to move the
mirror right, left, up, or down.
Turn the ignition switch to the ON
(II) position.
Move the selector switch to L
(driver’s side) or R (passenger’s
side).
1.
2.
3.
CONTINUED
Mirrors
Adjusting the Power Mirrors
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
161
INDICATOR
AUTO BUTTON
SENSOR
SELECTOR
SWITCH
ADJUSTMENT SWITCH
There is also a sensor on the back of
the mirror. Items hung on the mirror
may block this sensor and af f ect its
perf ormance.
10/08/04 19:08:36 31SJA660_166