Acura 2011 RL - Manual (Page 54)

Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker’s instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.
Other LATCH-compatible seats
have a flexible-type connector as
shown above.
Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Route the tether strap over the
head restraint, then attach the
tether strap hook to the anchor,
making sure the strap is not
twisted.
Tighten the strap according to the
seat maker’s instructions.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
Open the anchor cover.
4.
5.
7.
8.
6.
9.
Installing a Child Seat
48
RIGID TYPE FLEXIBLE TYPE ANCHOR
COVER TETHER STRAP HOOK
10/08/04 18:49:25 31SJA660_053