Acura 2011 RL - Manual (Page 53)

CONTINUED
To install a LATCH-compatible child
seat:
Move the seat belt buckle or
tongue away from the lower
anchors.
Your vehicle is equipped with
LATCH (Lower Anchors and
Tethers for CHildren) at the outer
rear seats.
Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
indicated by a small button above the
anchor point. Turn the ignition switch to the ON
(II) position, then push the rear
head restraint tilt button on the
ceiling console to pivot the head
restraints down.
1.
2.
3.
Installing a Child Seat
Installing a Child Seat with
LATCH
Dr
iv
er
and
P
asseng
er
Saf
e
ty
47
REAR HEAD RESTRAINT TILT BUTTON LOWER ANCHORS
BUTTON
10/08/04 18:49:13 31SJA660_052