Acura 2011 RL - Manual (Page 454)

Press and hold the SEL/RESET
button on the steering wheel for
more than 10 seconds. The
remaining engine oil life reset
mode will be shown on the multi-
information display.
To reset the engine oil life, press
the
or button on the steering
wheel to select RESET on the
display, and press the SEL/
RESET button.
To cancel resetting the oil life,
press the
or button on the
steering wheel to select CANCEL
on the display, and press the SEL/
RESET button.
If you do not complete the reset
procedure within 30 seconds after
selecting the reset mode, the mode
will be canceled automatically.
Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the display the
next time you turn the ignition
switch to the ON (II) position.
If the engine oil life display is not
displayed, press the SEL/RESET
button on the steering wheel
repeatedly until it is.
Turn the ignition switch to the ON
(II) position.
The maintenance item code or codes
indicate the main and sub items
required at the time of the oil change
(see page
).
If maintenance service is done by
someone other than your dealer,
reset the Maintenance Minder as
follows:
1.
2.
3.
453
Maintenance Minder
448
U.S.
Canada
TM
10/08/04 20:00:31 31SJA660_453