Acura 2011 RL - Manual (Page 212)

To select the desired temperature,
push the temperature control bar up
or down. Press the A/C button to view the
climate control display. Pushing
ENTER on the interface selector
turns the air conditioning on and off.
You will see A/C ON or A/C OFF in
the display.
When you turn the A/C off, the
system cannot regulate the inside
temperature if you set the
temperature control below the
outside temperature.
Press the button to increase
the fan speed and airflow. Press the
button to decrease it.
To set the driver’s and passenger’s
temperature separately, push the
temperature control bar up or down
on the driver’s or passenger’s side.
The driver and passenger can each
set the temperature to the desired
setting.
Press the A/C button to view the
climate control display, then turn the
interface knob to increase or
decrease the fan speed and airflow.
Using the Fan Control Buttons
Using the Interface Dial
Fan Control Temperature Control Bars Air Conditioning (A/C)
Climate Control System
206
10/08/04 19:16:45 31SJA660_211