Acura 2011 RL - Manual (Page 480)

Open the trunk.
Remove the light assembly cover
by pulling its outside edge.
Install the new bulb in the socket
by pushing it straight in the socket
until it bottoms.
Reinstall the socket into the light
assembly. Turn it clockwise to
lock it in place.
Test the lights to make sure the
new bulb is working.
When reinstalling the taillight
assembly, align and pop the snap
fasteners in place. Tighten the two
mounting bolts and reinstall the
trim in place.
Tighten the mounting nut securely,
and reinstall the maintenance lid.
Remove the socket by turning it
one-quarter turn counterclockwise.
Remove the burned out bulb by
pulling it straight out of its socket.
9.
8.
1.
2.
12.
11.
10.
6.
7.
Replacing a Back-up Light Bulb
Lights
474
SOCKET
BULB
COVERS
10/08/04 20:05:09 31SJA660_479