Acura 2011 RL - Manual (Page 71)

This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. This indicator comes on when you
turn on the fog lights. For more
information, see page
.
This indicator comes on with the
high beam headlights. For more
information, see page
.
This indicator also comes on with
reduced brightness when the
daytime running lights (DRL) are on
(see page
).
This indicator comes on when you
turn on the cruise control system by
pressing the CRUISE button on the
steering wheel (see page
).
If it comes on and stays on at any
other time, there is a problem with
the VSA system. You will also see a
‘‘CHECK VSA SYSTEM’’ message
on the multi-information display.
Take your vehicle to a dealer to have
it checked. Without VSA, your
vehicle still has normal driving ability,
but will not have VSA traction and
stability enhancement. For more
information, see page
.
It flashes when VSA is active (see
page
).
This indicator has two functions:
This indicator comes on as a
reminder that you have turned off
the vehicle stability assist (VSA)
system.
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. For more information, see
page
.
142
140
142
316
1.
435
435
435
On models without adaptive cruise
control (ACC)
Instrument Panel Indicators
Vehicle Stability Assist
(VSA) System Indicator Fog Light Indicator
High Beam Indicator
Cruise Main Indicator
VSA OFF Indicator
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
65
10/08/04 18:52:42 31SJA660_070