Acura 2011 RL - Manual (Page 456)

Also, the percentage ‘‘0’’ keeps
blinking on the display.
If the indicated required service is
not done and the remaining engine
oil life becomes 0%, the multi-
information display will show a
‘‘SERVICE PAST DUE’’ message,
the total distance traveled after the
remaining oil life became 0%, and the
maintenance item code(s).
This message is displayed again
when you drive over 10 miles (for
U.S. models) or 10 km (for Canadian
models) after seeing the 0% message.
Immediately have the service
performed, and make sure to reset
the display as previously described.
This particular message is displayed
when the mileage after the engine oil
life became 0% reaches 10 miles (for
U.S. models)/10 km (for Canadian
models).
These messages will come on every
time you turn the ignition switch to
the ON (II) position.
Pressing either INFO button ( / )
switches the display from the
message to another display. To see
the message again, press either
INFO button repeatedly.
Maintenance Minder
450
U.S.
MAINTENANCE ITEM CODE(S)
Canada
NEGATIVE DISTANCE TRAVELED
TM
10/08/04 20:00:52 31SJA660_455