Acura 2011 RL - Manual (Page 457)

This particular message is displayed
when you drive over 10 miles (for
U.S. models) or 10 km (for Canadian
models) after seeing 0%.
When you press the SEL/RESET
button to select the engine oil life
minder, the message ‘‘SERVICE’’,
along with the maintenance item
code and the total negative distance
traveled after the oil life became 0
percent, will be displayed on the
lower part of the multi-information
display.
If you have the required service
done but do not reset the display, or
reset the display without doing the
service, the system will not show the
correct maintenance intervals. This
can lead to serious mechanical
problems because you will no longer
have an accurate record of when
maintenance is needed.
CONTINUED
Maintenance Minder
Important Maintenance
Precautions
Ma
int
e
na
nce
451
U.S.
Canada
TOTAL NEGATIVE DISTANCE
TRAVELED
TM
10/08/04 20:01:00 31SJA660_456