Toshiba Pocket Pc e830 - Manual (Page 32)

Toshiba Pocket PC e830 User’s Guide
32
Wireless communication switch
1. To enable the Wireless module (Toshiba Pocket PC e830W only),
make sure the Wireless communication switch is turned on. (The
default setting is power off. Slide the switch to the left to turn the
power on.) If the switch is on, the Wireless Control setting screen,
appears to set the power for the Wireless LAN/Bluetooth.
2. Select ON for your wireless communication network, then tap OK.
Wireless LED
For additional information on Wireless LAN configuration,
see "Configuring a Wireless LAN" on page 118. For addi-
tional information on configuring Bluetooth, see "Config-
uring Bluetooth settings" on page 161.
LED Status
Off Wireless communication switch is turned off
Orange Wireless LAN module is enabled
Blue Bluetooth module is enabled
Flashing Orange/Blue Wireless LAN and Bluetooth modules are both enabled
NOTE
Switch Cover
On
Off
Wireless Communication Switch