Toshiba Pocket Pc e830 - Manual (Page 223)

Chapter 12: Additional Information
223
Device Address
This is the unique address given to each Bluetooth SD Card.
Device Class
This indicates the type of Bluetooth device (PC, cell phone, etc.). A Blue-
tooth SD Card is categorized as a PDA.
Authentication
This is the process of confirming an authentication password to allow a
remote Bluetooth device to connect to Local Device. If the authentication
passwords on both devices do not match, the connection is refused.
These are the following types of authentication:
Authentication Status
For remote devices that have performed Bluetooth authentication, Pair-
able is displayed. For unauthenticated devices, Untrusted is displayed.
Service Name
This indicates the type of service (profile) provided by a Bluetooth device.
PIN Code
This is a password of up to 16 alphanumeric characters.
Depending on the remote device, the PIN Code might be a fixed value
with a limit on the number of digits, so be sure to confirm these conditions.
It is also called a Bluetooth passkey.
■ Bluetooth authentication
This is requested when trying to establish a Blue-
tooth connection with a remote device. You must
enter the Bluetooth passkey to connect.
■ OPP authentication
This is requested when trying to connect to a
remote device to send all contacts by OPP service.
You must enter the OPP password.
■ FTP authentication This is requested when trying to connect to a
remote device to start FTP service. You must enter
the FTP password.