ZyXEL Communications P-334 - Manual (Page 84)

Prestige 334 User’s Guide
83 Chapter 6 WAN Screens
Figure 25 Traffic Redirect LAN Setup
6.8 Configuring Traffic Redirect
To change your Prestige’s Traffic Redirect settings, click WAN, then the Traffic Redirect
tab. The screen appears as shown.
Figure 26 WAN: Traffic Redirect
The following table describes the labels in this screen.
Table 20 Traffic Redirect
LABEL DESCRIPTION
Active Select this check box to have the Prestige use traffic redirect if the normal WAN
connection goes down.
Backup
Gateway IP
Address
Type the IP address of your backup gateway in dotted decimal notation. The Prestige
automatically forwards traffic to this IP address if the Prestige's Internet connection
terminates.