ZyXEL Communications P-334 - Manual (Page 74)

Prestige 334 User’s Guide
73 Chapter 6 WAN Screens
Figure 18 WAN: Route
The following table describes the labels in this screen.
6.4 Configuring WAN ISP
To change your Prestige’s WAN ISP settings, click WAN, then the WAN ISP tab. The screen
differs by the encapsulation.
6.4.1 Ethernet Encapsulation
The screen shown next is for Ethernet encapsulation.
Table 15 WAN: Route
LABEL DESCRIPTION
WAN Traffic
Redirect
The default WAN connection is "1' as your broadband connection via the WAN port
should always be your preferred method of accessing the WAN. The default priority
of the routes is WAN and then Traffic Redirect.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.