ZyXEL Communications P-334 - Manual (Page 139)

Prestige 334 User’s Guide
Chapter 13 Remote Management Screens 138
C
H A P T E R
13
Remote Management Screens
This chapter provides information on the Remote Management screens.
13.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
Prestige interface (if any) from which computers.
You may manage your Prestige from a remote location via:
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The Prestige
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP
13.1.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1 A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet,
FTP or Web service.
Note: When you configure remote management to allow
management from the WAN, you still need to configure a
firewall rule to allow access. See the firewall chapters for details
on configuring firewall rules
• Internet (WAN only) • ALL (LAN and WAN)
• LAN only • Neither (Disable).
Note: When you Choose WAN only or ALL (LAN & WAN), you
still need to configure a firewall rule to allow access.