ZyXEL Communications NSA210 - Manual (Page 59)

NSA210 User’s Guide
59
C
H A P T E R
4
Tutorials
4.1 Overview
This chapter provides tutorials that show how to use the NSA.
• Creating a Volume , see page 59
• Deleting a Volume , see page 66
• File Sharing Tutorials , see page 67
• Download Service Tutorial , see page 77
• Broadcatching Tutorial , see page 93
• Copy and Flickr Auto Upload Tutorial , see page 98
• FTP Uploadr Tutorial , see page 99
• Web Configurator’s Security Sessions , see page 104
• Using FTPES to Connect to the NSA , see page 116
• Using a Mac to Access the NSA , see page 117
• How to Use BackupPlanner , see page 120
4.2 Creating a Volume
This section shows you how to create a volume on your NSA.
Creating a volume deletes all existing data in the SATA or eSATA
hard disk. Make sure you have a backup of your existing data
before following the steps in this section.
Your NSA has a single bay for a SATA (Serial Advanced Technology Attachment)
hard disk. The firmware installed during hard disk initilization (
Chapter 2 on page
29 ) automatically creates a JBOD volume on your SATA hard disk. JBOD is the
default storage method if you are using a single hard disk for your NSA.