1 report config screen, 2 email setting, 1 report config screen 15.4.2 email setting – ZyXEL Communications NSA210 User Manual
Page 311: Refer to
Chapter 15 Maintenance Screens
NSA210 User’s Guide
311
15.4.1 Report Config Screen
In the Log screen, click Report Config
to
do the following:
• Use the Email Setting screen (
) to enable and
configure e-mail alerts from the NSA.
• Use the Report Setting screen (
) to select the type
of alerts you want to receive through e-mail and schedule when the NSA e-mails
the alerts.
• Use the Syslog Server Setting screen (
) to enable
the syslog server and select the categories to include in the log report.
15.4.2 Email Setting
You can enable and configure e-mail alerts from the NSA. In the Report Config
screen, click the Email Setting tab to open the following screen.
Figure 146 Maintenance > Log > Report Config: Email Setting
The following table describes the labels in this screen.
Table 98 Maintenance > Log > Report Config: Email Setting
LABEL
DESCRIPTION
Enable Log Email
Click this to have the NSA e-mail log alerts to your e-mail account.
Email To
Enter the e-mail address where you want to receive the log alerts.
Email From
Enter the e-mail address the NSA uses in the From field of the e-mail
header for its log alerts.
Email Server
Enter the e-mail server address the NSA uses to send e-mail alerts,
Email Format
Select the e-mail format you want the NSA to use in its e-mail alerts.
Use SMTP
Authentication
Click this if the e-mail server you want the NSA to use for its e-mail
alerts requires a username and password.
User
Enter the username for the e-mail server.