Xerox FaxCentre 2218 - Manual (Page 67)

Xerox FaxCentre 2218 User Guide Page 3-5
Paper and Other Media
Using the Bypass Tray
The Bypass Tray is located on the right side of your machine. It can be closed when not in use,
making the product more compact. Use the Bypass Tray to print transparencies, labels,
envelopes or postcards in addition to making quick runs of paper types or sizes that are not
currently loaded in the paper tray.
Acceptable print media is plain paper with sizes ranging from 98 x 148 mm (3.86 x 5.83 inch),
to Legal size (216 x 356 mm / 8.5 x 14 inch) and weighing between 60 g/m² and 160 g/m² (16
lb and 43 lb).
The following table summarizes the print media allowed and the maximum stacking height for
each paper type.
L The height is measured with the stack of sheets laid on a flat surface.
7
¾ To select a paper tray, press the
[Paper Supply] key until the
required tray is lit on the Status
Map.
Tray 1 and the Bypass Tray are
available as standard, Tray 2 is
optional.
If two tray lights display together,
the Auto Tray Switching feature is
active. When one tray runs out of
paper, the machine will switch to
the other selected tray.
Enter
Paper Supply
Status Map
PAPER TYPE MAXIMUM STACKING HEIGHT
Plain/Bond/Colored and Pre-
printed Paper 100 sheets or 9 mm (0.35 inch)
Envelope 10 envelopes or 9 mm (035 inch)
Transparency 30 sheets or 9 mm (0.35 inch)
Label 10 sheets or 9 mm (0.35 inch)
Cardstock 10 sheets or 9 mm (0.35 inch)
01_UG.book Page 5 Wednesday, March 7, 2007 3:00 PM