Xerox FaxCentre 2218 - Manual (Page 44)

Page 2-16 Xerox FaxCentre 2218 User Guide
Getting Started
USB or Parallel Port Cable
)
Only connect one of the above cables. If you are using Windows NT you must
use the parallel port. When using the USB connection, your machine provides
two USB modes; Fast and Slow. Fast is the default mode. Some PC User’s may
experience poor functionality in the default mode. If this occurs, select the Slow
mode. For information about changing the USB mode, refer to “Machine Setup”
on page 2-21.
3
CAUTION: Shut down the
computer before connecting the
cable.
¾ Connect the USB Cable which
came with your machine.
OR
¾ If you want to use a parallel print
cable, only use an IEEE-1284
compliant cable and connect it to
the parallel connector on your
machine.
01_UG.book Page 16 Wednesday, March 7, 2007 3:00 PM