Xerox FaxCentre 2218 - Manual (Page 159)

Xerox FaxCentre 2218 User Guide Page 8-13
Machine Administration
¾ To protect more Functions select [Yes], press [Enter] and repeat steps 4 and 5.
To end, select [No] and enter the passcode.
¾ If you enabled Passcode Protection, refer to “Change the Passcode” starting on page 8-13
to enter the new passcode.
Change the Passcode
This procedure is used to change an existing passcode or to enter a passcode after Passcode
Protect has been enabled.
¾ Press the [Machine Status] key.
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
¾ If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [Change Passcode] using the Navigation Keys and press [Enter].
¾ Enter the existing passcode and press [Enter].
)
This will be blank if you have just enabled Passcode Protection
Fax Setup Protect All
Allow All
Allow Speed Dials
Allow Group Dials
Allow One Touch Keys
Allow Phonebook Setup
Sys. Admin Tools Protect All
Allow All
Reports Protect All
Allow All
Off
6
7
1
2
3
01_UG.book Page 13 Wednesday, March 7, 2007 3:00 PM