Xerox FaxCentre 2218 - Manual (Page 158)

Page 8-12 Xerox FaxCentre 2218 User Guide
Machine Administration
Passcode Protection
System Administration functions can be restricted to individual users by requiring that a
passcode be entered before access to the functions can be granted.
Enable Passcode Protection
¾ Press the [Machine Status] key.
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [Passcode Protect] using the Navigation Keys and press [Enter].
)
When the machine is first installed, the passcode is blank. When you choose Yes, you
will be asked to enter the passcode. Simply press [Enter] when requested to enter the
passcode.
¾ Using the Navigation Keys select the Function to protect from the table below and press
[Enter].
¾ Using the Navigation Keys select the Permissions from the table below for the function you
chose in the previous step. Press [Enter].
1
2
3
4
5
FUNCTION PERMISSIONS
Machine Setup Protect All
Allow All
Allow Tray Sizes
01_UG.book Page 12 Wednesday, March 7, 2007 3:00 PM