Xerox FaxCentre 2218 - Manual (Page 166)

Page 8-20 Xerox FaxCentre 2218 User Guide
Machine Administration
Dial Tone Detection (DT Detection)
This tool is used to allow the user to make the device check for a dial tone before sending a
fax. The device will wait for a maximum of 10 seconds until a dial tone is detected. If a dial
tone is detected, auto dial will start. If a dial tone is not detected, an error will be displayed and
auto dial will not start.
Using DT Detection:
¾ Press the [Machine Status] button.
¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
¾ If the System Admin Tools have already been passcode protected, type in the password
and press [Enter].
¾ Select [DT Detection] and press [Enter].
¾ Select [On] using the navigation tools.
1
2
3
01_UG.book Page 20 Wednesday, March 7, 2007 3:00 PM