Xerox 600 - Manual (Page 37)

Aligning a single original
To ensure that the alignment of the scanned image matches the alignment of
the original, you can use the alignment mark.
To align an original page on the document glass:
1 Lift the scanner cover, as shown.
2 Place the original face down on the document glass.
Position the original so the top edge is toward the rear of the document glass
and the top-right corner points to the alignment mark, as shown.
3 See “Opening the OneScanner Dispatcher Application,” later in this chapter, for
complete scanning instructions.
Alignment mark
Original face down
29 Scanning Images