Unpacking the scanner and accessory kit 6, Choosing a scsi cable 6, Unpacking the scanner and accessory kit – Xerox 600 User Manual
Page 14: Choosing a scsi cable
Unpacking the scanner and accessory kit
Make sure you have the items shown here.
You may have received additional third-party software with your scanner.
Choosing a SCSI cable
The Apple Color OneScanner connects to your Macintosh through a Small
Computer System Interface (SCSI) cable (pronounced “SKUH-zee”). This
cable provides for high-speed communication between the computer and a
SCSI device, or devices, connected to the computer.
You will need to purchase a SCSI cable to connect your Apple Color
OneScanner to the Macintosh. If you have a Macintosh IIfx, you also need a
special terminator. For more information about connecting the scanner to a
Macintosh IIfx or PowerBook computer, see Appendix C.
Apple recommends that you purchase only Apple-brand SCSI cables, which
are properly shielded for trouble-free operation. You can purchase SCSI
terminators and cables from your authorized Apple reseller.
Color OneScanner
Color OneScanner software
Quick Start
card for OneScanner
Dispatcher software
Color OneScanner
User’s Manual
Power cord
6
Chapter 2