Bypassing the document feeder 121, Bypassing the document feeder – Xerox 600 User Manual
Page 129
Bypassing the document feeder
As mentioned earlier in this chapter, certain originals may not work properly
with the document feeder. You may want to scan valuable documents that
could be damaged by the document feeder. You can do this by placing the
originals on the scanner glass rather than using the document feeder.
To bypass the document feeder:
1
Lift the document feeder as if it were the scanner cover.
2
Place the original on the glass.
3
Lower the document feeder over the original, if possible, so the document feeder is
closed during the scan.
4
Scan the original as usual.
121
Using the Automatic Document Feeder